Back to Products

HWg-WLD plain

HWg-WLD: Ethernet  water leak detector

£110.14

Qty

HWg-WLD: Ethernet  water leak detector
Features Downloads

Features

HWg-WLD is an Ethernet  water leak detector. The  sensing cable  detects as little as a  few drops  of a liquid, and can be also used to  detect condensation. Whenever a liquid is detected, the device  sends an e-mail  or a  SNMP Trap, or uses a central SMS gateway  HWg-SMS-GW3  to  send a text message. By providing an  early detection and warning, HWg-WLD can  prevent damages  and avoid the associated costs. A built-in  web server  is used for configuring. The device can be  monitored remotely over the internet.    It works with  HWg-PDMS  and  HWg-Trigger.
Features:
  • 2 - 85 m (6.5 - 280 ft) long sensing cable can be extended using sensing as well as non sensing segments.
  • The sensing cable can be freely bent, twisted or even knotted, pressed or slightly pinched without raising a false alarm.
  • M2M communication protocols SNMP, XML and Box-2-Box allow integration into more complex monitoring systems.
  • Connected via LAN. Configuration via built-in web server.
  • The detection cable monitors even the smallest volumes of electrically conductive liquids. After being flooded with clean water it can be dried and reused.
  • Detected liquid leak as well as the sensing cable disconnecion sends an alert by e-mail, SMS, SNMP Trap, or activates a remote relay at a Poseidon2 of Damocles2 within the same LAN.
  • For Ring or SMS alarm use the  HWg-Trigger software  (external GSM modem required), or a  HWg-SMS-GW3 gateway  in the same LAN.
  • PoE (Power over Ethernet) version available.
  • With the  HWg-PDMS software, logged data can be exported to MS Excel.
  • Compatible with a range of third party SW. Examples for programmers on using the product are available in the  HWg-SDK  (Borland C , MS Visual, VB, C#, PHP, JAVA and more).
Applications and usage:
  • Detection of  water leaking from pipes  (cable runs along the pipes)
  • Detection cable laid along the walls
  • Under raised floors
  • Above suspended ceilings
  • Detection of water leaks in drip trays
  • Detection of water leaks under A/C outlets

Water sensing cable

  •  The sensing cable detects even the smallest volume of  water, ethylene glycol,  or other conductive liquid anywhere on the total length of the cable.
  • The sensing cable is terminated with connectors.
  • The following can be combined:
    • Water sensing cable WLD -  2m
    • Water sensing cable WLD -  10m
    • Water sensing cable WLD -  50m
    • Prolong cable -  5m
  • The sensing part of the cable can be up to 85m (280ft) long.
  • The cable can be extended anywhere (even between sensing segments) with a 2-wire cable (max 100m - 330ft).
  • The WLD water detection cable is reusable (needs to be dried)
Box-2-Box mode HWg-WLD can directly control relay outputs over the network. No additional software is necessary.
  • Supports any Poseidon or Damocles unit
  • State is transferred upon changes as well as periodically (default period is 30s). Uses XML over http.
  • The output must be in the "Manual" mode (no local condition for activating the output)
  • The user configures the remote device IP & port and the remote output ID (ID 151 = Output 1, 154 = Output 4)
  • If the relay is write-protected with a password, the user sets the password for controlling the relay
  • Output control can be tested with the TEST button

Downloads

Datasheet 1

Our Manufacturers